Walvoil Mini joysticks Otto DPX100 de 8 secciones con bus CAN distribuidor hidráulico para maquinaria forestal
≈ US$ 6.673
Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.
Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.
No compre productos cuyo precio diste mucho del precio medio de equipos similares.
No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.
Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.
- Transferencia de prepago a la tarjeta
- No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
- Transferencia a una cuenta «fiduciaria»
- Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
- Transferencia a una cuenta de una empresa con un nombre similar
- Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
- Sustitución de sus propios datos en la factura de una empresa real
- Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
Contactos del vendedor
+48 663 39...
+48 663 399 034
Walvoil DPX100 + Panel de control Fire Salamander L distribuidor hidráulico para maquinaria forestal
Polonia
Polonia
Polonia
Polonia
Polonia
Polonia
Polonia, Tarnowskie Góry
Polonia, Tarnowskie Góry
Polonia, Tarnowskie Góry
Portugal, Alverca do Ribatejo
Alemania, Bergkamen
Otto Canbus 12/24 V joysticks.
This kit is configured for the most common machine set-ups and supports up to 8 standard forestry crane functions. If you require a different dedicated configuration, we can tailor it to your needs, including variations in coils, voltage, number of sections, anti-shock valves, connections, etc.
The kit is designed for plug-and-play convenience. We take care of everything from the connectors to the software configuration.
We offer technical support and are available at any time via email, WhatsApp and telephone.
If you have any questions or require assistance, you can contact us at any time at - or -.
Once the order has been placed, flow rate and pressure can be fully customised to the customer’s specific requirements.
-------------------------------------------------- ------------------------------------------------- - -------------------------------------------------- --------
Walvoil DPX 100 hydraulic section valve with compensation, fully proportional
Technical specifications of the standard configuration:
Inlet section: 32 GPM 120 l/min – Pmax 300 bar 4351 psi Power supply connection: 3/4‘ BPS, tank return connection: 3/4’ BPS
1. Main boom 60 l/min 16 GPM anti-shock valves 190/80 bar 2755/1305 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
2. Boom 60 l/min 16 GPM anti-shock valves 190/220 bar 2755/3190 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
3. Swing 40 l/min 10 GPM anti-shock valves 200/200 bar 2900/2900 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
4. Extension 80 l/min 21 GPM anti-shock valve 140 bar/closed rod 2030 psi side A 4/3 centre; A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
5. Rotator 20 l/min 5 GPM, A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
6. Grapple 60 l/min 16 GPM, A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
7. Left leg support 20 l/min 5GPM A+B closed circuit, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever; Spool: 20 l/min; No anti-shock valves
8. Right leg support 20 l/min 5 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever; Spool: 60 l/min; No anti-shock valves
Outlet section: with the option to combine valves, with a vent valve (LS relief), with a pressure-reducing valve. Control port “V” and drain port “L” closed. Side connections “T1”, “P1”, “LS1” sealed. DBV fixed and sealed to 175 bar at 90 l/min.
-------------------------------------------------- ------
CANBus Otto Joysticks
CANBus board for analogue/digital inputs.
DESCRIPTION
MDCi is an electronic circuit board with a CANBus interface
Simulate 2 JC joysticks using 2 Otto joysticks and a push-button dashboard.
Transmission takes place immediately upon switching on the
electronic board.
FEATURES
- Supply voltage from 10 to 30 Vdc
- CAN V2.0B communication bus
- 120-ohm internal terminating resistor not present in this version
- 2 diagnostic LEDs (red and green)
- Firmware can be updated via the integrated serial interface
SIGNALS
Red LED flashes once: Short-circuit fault on the stabilised +5V output
Red LED flashes twice: One of the analogue inputs was detected as not being in the rest position upon power-up
The input is disabled until a reset is performed.
Green LED is lit: The circuit board is functioning correctly.
The green LED flashes once each time the status of an input (analogue or on/off) changes.
MDCi control unit for OTTO joystick interface
and button panel for Waldkranich
Installation version: X1
Firmware: mdc_P5_01.hex
Config file: mdc_P5_01.cfg
--------------------------------------------------
------
Technical specifications:
Supply voltage: 10 VDC to 30 VDC (internal 5x20 8A fuse, type F8A)
Current consumption: 300 mA + load outputs (max. 7.5 A)
Operating temperature range: -20 ÷ +70 °C
Power supply for external potentiometers: +5 V – max. current 50 mA
Minimum PWM current range: from 100 to 2500 mA
Maximum PWM current range: from 100 to 2500 mA
PWM frequency: 50–60–70–85–100–125–150–200–250–300 Hz
Impedance of analogue inputs: 11 kOhm at 2.5 V
Overall dimensions with connector fitted: 256 × 210 × 45 mm
Drill hole dimensions: 242 x 142 mm (4 holes, 6 mm in diameter)
-------------------------------------------------- ------
NOTE:
To achieve a cable length of L = 1.5 m, you must
- Make the joystick/cable connections using 7x0.75 mm² wire by removing the
original connectors
- Insert the corrugated sheath and secure it to the underside of the joystick (see photo).
- Connect the 7x0.75 cable to the 6-pin Deutsch socket
(these are small contacts)